A power failure can be incredibly frustrating because it brings everything to a standstill. When you have to deal with frequent power cuts, you have reason to be concerned, especially if the power cuts are because of issues within your home and not because of a breakdown at the utility company. This guide will help you understand the causes behind your home's consistent power failures. If you face these issues regularly, you will need to rope in the services of a professional electrician to get the problem fixed.
Short circuits most commonly cause power failures. A short circuit occurs because of a low resistance connection transpiring between electrical conductions distributing power to a circuit. This creates excessive electrical flow in the power source, which will not only destroy the source but can cause your entire power system to fail. If a fuse exists in the circuit, then it will blow out and stop current flow. A short circuit may even lead to a fire because of the generation of heat. Short circuits frequently take place when wires aren't insulated or if there is interference in the circuit. Short circuits can be prevented using fuses and circuit breakers. Your electrician is best placed to diagnose and address your short circuit problem to prevent electrical failure.
Breaking Down Of Insulated Cables
Insulated power cables supplying electricity to your home typically break down because the insulation is highly stressed for long periods of time. Stress may occur because of weather conditions or even mechanical defects. Insulation can break down in poorly installed power cables, so you may need to get them replaced, especially if this is the cause behind your home's constant power failures. To prevent this problem, your electrician must use high-quality insulated cables and must ensure minimal obstruction in the electrical circuit path.
Another cause of power failures in your home is power surges. Power surges are either manmade through faulty electrical wiring and heavy loads or natural through lightning, earthquakes and tremors. These power surges will lead to instant overheating and will cause extensive damage to your electrical wiring and appliances. When your equipment and wiring is heavily damaged, your home may suffer from frequent power failures. You should ideally get your electrician to install surge protectors and circuit breakers to protect your home's wiring from preventable power surges.
If your home is frequently facing power failures, then it could be because of any of these causes. Contact a professional electrician immediately to address these problems before they cause more damage to your home.